Empura Equipment Stands

What should you look for in equipment stands?

Match the stand to the appliance footprint, operating weight, heat output, required clearances, and service connections. Check the top gauge, frame construction, rated load, undershelf material, leg or caster arrangement, and sanitation listing. The appliance must sit fully supported without blocking ventilation, grease removal, gas connections, or electrical access.

Empura's current equipment stands include 16- and 18-gauge stainless steel tops with galvanized undershelves. Listed footprints range from 24 by 24 inches to 72 by 30 inches, depending on the model, and the stands carry NSF certification. Unlike a standard Empura worktable, a stand is built to support the concentrated weight and heat of a countertop appliance, so verify the exact stand rating and dimensions against the equipment before installation.

Who uses equipment stands?

• Restaurants
• Hotels
• Bars
• Catering Operations
• Schools
• Healthcare Facilities
• Cafeterias
• Convenience Stores

Frequently asked questions

What is the difference between an equipment stand and a worktable?
An equipment stand is built and proportioned to support countertop appliances at operating height. A worktable primarily provides a preparation surface, so it should not be assumed to carry the same concentrated load or heat.

How do I match a stand to countertop equipment?
Compare the appliance width and depth, operating weight, leg placement, required clearances, and the stand's published capacity. Also plan access to controls, drains, gas, electricity, and cleaning areas.

Can an equipment stand be placed under a fryer or griddle?
Yes, if the stand is approved for the appliance's size, weight, and heat and the complete installation meets ventilation and clearance requirements.

What can be stored on the undershelf?
Use it for items permitted near the appliance, such as clean pans or tools. Keep combustibles, chemicals, and anything that blocks service connections away from hot equipment.

Can casters be added to an equipment stand?
Only use compatible, load-rated casters approved for the stand and appliance. Mobile gas equipment may also require an approved connector and restraint.